Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing

Personalización: Disponible
Servicio postventa: aceptable
Garantía: 3 meses

Products Details

Información Básica.

No. de Modelo.
C120, C130
Tratamiento de superficies
Pulido
Proceso de manufactura
Forja
Material
Acero fundido
color
personalizado
usado para
maquinaria minera
aplicación
cantera
ventaja
resistente al desgaste
proceso
forja+mecanizado+tratamiento de superficies
operación
larga vida útil
apariencia
suave
calidad
100% traje original
Paquete de Transporte
plancha de pallet
Especificación
original
Marca Comercial
ona
Origen
Anhui
Código del HS
847490
Capacidad de Producción
50000000tons/año

Descripción de Producto

Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing

Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing
Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing
Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing
The frame bearing housing of the broken jaw or the temperature in the movable jaw is too high?

Cause of issue:
1. The bearing is short of oil, oil is cut off or too much oil is filled.
2. The oil hole is clogged, making it impossible to fill with oil.
3. The position of the counterweight of the flywheel is offset, making it difficult to stabilize the frame.
4. Axial movement of the fixed bushing
5. The bearings are worn and the cage is damaged.
6. The friction between the movable jaw seal sleeve and the top cover causes the temperature to rise, or the frame bearing cover and the main shaft move synchronously and the friction heats up.

Solution:
1. Read the instructions and fill in oil according to the instructions.
2. Clean the blockage in the oil hole and oil tank promptly
3. Adjust the attitude and position of the counterweight in the flywheel groove
4. Tighten the tightening bushing firmly
5. Replace with new bearings promptly
6. Replace the top cover and sealing sleeve, loosen the bearing top cover of the frame bearing housing, and use a fuse as a gasket and insert cover to press into the bearing seat to eliminate rotation.

Which Main Parts We Have?
Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing
  • Jaw Plate

  • Cheek Plate

  • Protection Plate

  • Side Plate

  • Toggle Plate

  • Toggle Seat

  • Bearing Housing

  • Tightening Wedge

  • Mounting Wedge

  • Fill Wedge

  • Wedge

  • Roller Bearing

  • Tightening Bushing

  • Front End

  • Rear Edge

  • Pulley

  • Flywheel

  • Pitman

  • Spring

  • Guide Ring

  • Return Rod

  • Support Bar

  • Hydraulic Cyliner

  • Spacer

  • Lubrication Unit

  • Deflector Plate

  • Damper

  • Progressive Feeder

  • Frame Assy

  • Supports Installation

  • Taper Bushing

  • Bracket

  • Shaft


Quality Control:
Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing

Gantry Machining Center MAZAK FJV-6080

Main motor energy rate: 37KW
Travel: 2000mm * 1400mm * 660mm
Workbench: 2000mm * 1400mm
Spindle speed: 20-10000min-1
Positioning accuracy: ± 0.001mm
Knife magazine: 30 pieces
Knife handle: HSKA100

Boring and Milling Machining Center TOSHIBA BTD-110H.R16

 
Travel: 2000mm * 1500mm * 1150mm
Workbench: 2200mm * 2000mm
Knife handle: BT50
Revolution: 3000 (r/min)
Positioning accuracy: 0.01
Knife magazine: 60 pieces
Load capacity: ≤ 6.3T
Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing
Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing
Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing
Company Introduction:
Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing
Our Machines:
Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing
Q&A
1. Q: What kinds of products do you offer?

A: We provided parts are mainly related to your plant machine. It ranges from the drill rod, excavator buckets and wheel loaders, crusher spare parts, construction machinery parts, brass bush, conveyor and screen spare parts, beneficial equipment spare parts, grinding mill spare parts, machining spare parts and other customized spare parts.

2. Q: What kind of materials are you familiar with?

A: We are familiar with carbon steel, alloy steel, standard wearing plate, high manganese steel, high chrome steel, martensitic steel, casting iron, bronze and ceramic insert material.

3. Q: What's the maximum single weight that can be casted? What is your processing capacity per day?

A: The single weight that can be casted at one time is 13 metric tons. The capacity is 80 tons per working day.

4. Q: Can you use foundry machining castings?

A: Yes, the CNC machine can machine material hardness from HB200 to HRC62.The maximum machining length is 8m and maximum width is
4m.

5. Q: What information do we need to provide to you in order to confirm our parts order?

A: We work with technical drawings for any non-standard products. If the order is for standard parts, you only have to provide us with the part number so we may define the parts of the order.

6. Q: May we visit the factory?

A: Yes, you can visit the factory during working days and our sales team would he happy to assist you.
It is possible, to take the high speed train from Shanghai station to the factory and we can pick up you at the airport or train station.

What Else You May Need?
Stone Jaw Crusher Spare Parts C120 C130 Bearing Housing

Contáctenos

No dude en enviarnos su consulta en el siguiente formulario. Le responderemos en 24 horas.